loctite

Approved for use in aviation as well as automotive applications. Applications include aviation and marine engines, threaded connections. Aviation...

Medium strength. Used to lock and seal fine threaded nuts, bolts, and studs in a variety of applications removable with tools. Also used for moun...

Solid film protection for engine parts, bearings, and servo-mechanisms. Temperature resistant up to 750°F as a dry film lubricant, 2400°F as an an...

An amber, non-sag, aerospace grade epoxy with a 120-minute worklife. Attributes:Capacity Vol. [Nom] = 50 mL, Color = Amber, Packing Type = Dual Ca...

Two-part, pourable epoxy system heavily reinforced with aluminum powder. For casting and repairing of aluminum parts, and for making molds and fix...

Aluminum filled epoxy rebuilds and repairs aluminum equipment, forming a non-rusting finish. Attributes:Applicable Materials = Aluminum, Capacity ...

Pre-measured. Fills porosities and can be used to build up worn parts. Attributes:Adhesive Tensile Shear = 2,000 psi, Applicable Materials = Glas...

Ideally suited for applications repairing worn parts, such as shafts, housings, keyways, and flanges, as well as broken or damaged parts, such as c...

Trowelable. For repairing and resurfacing cracks in concrete floors. Bonds to old and new concrete and provides greater strength and chemical res...

Pre-measured. Fills porosities and can be used to build up worn parts. Attributes:Adhesive Tensile Shear = 2,000 psi, Applicable Materials = Glas...

Cut off a section, knead, and apply to leaking pipes or damaged equipment. Certified and approved for use with drinking water system components. ...

This fast cure, general purpose epoxy bonds virtually any material. Fills or seals cracks and rebuilds worn surfaces. Comes in a 1 oz syringe wit...

Forms a non-rusting, very hard, durable finish on damaged stainless steel surfaces. Attributes:Applicable Materials = Aluminum; Bronze; Cast Iro...

Pourable and self-leveling. Epoxy is recommended for casting into hard-to-reach areas, anchoring and leveling, and forming molds and fixtures. At...

Will not sag or shrink. Rebuilds worn parts fast-limits downtime. High steel content-cures to a metal-like finish. Superior adhesion-bonds well ...

Ideal for renewing or protecting surfaces subject to corrosion, abrasion, and harsh environments. Ferro-silicone-filled epoxy has outstanding comp...

This putty like material is ideal for plumbing, irrigation, and marine applications, because it is unaffected by chlorinated or salt water. Hand k...

Ceramic fibers give this trowelable putty excellent wear and abrasion resistant properties. Cures to smooth, low friction surface. For surfaces e...

Reliable, paste-like gasket sealant/dressing/coating. Sets more slowly to a pliable film best suited for non-rigid, vibrating assemblies. Attribu...

A wicking grade, high strength, low viscosity theadlocker that is ideal for fine screws, bolts and studs. Locks, seals, and retains fasteners. On...

High strength. Used in a broad range of applications to lock and seal coarsely threaded nuts, bolts, and studs. Also known as Loctite 086 Threadl...

A low viscosity, medium strength threadlocker that locks, seals, and retains fasteners. Suitable for use with fine threaded nuts, bolts and studs....

Sealant holds gaskets in place during assembly. Sets quickly to a very tacky film. Contains no ozone depleting compounds. Attributes:Application...

Two-part, transparent, cloudy colorless to pale yellow cyanoacrylate/acrylic hybrid gel adhesive. Provides a fast fixture at room temperature. It...

Epoxy adhesive is a high temperature, chemically resistant, high viscosity, and multiple surface structural adhesive. Excellent gap filling capabi...

Makes high performance, leakproof gaskets in one minute. Equipment can be returned to service immediately. Outperforms precut gaskets. Attribute...

Wicking viscosity CA for tight bond lines provides excellent bond strength to mostmaterials including elastomers, metals and platings. Excellent f...

UV, saltwater, fuel, and acid resistant. Hundreds of uses in industrial, automotive, and marine. Not tape. Self-fusing, multi-purpose, silicon w...

UV, saltwater, fuel, and acid resistant. Hundreds of uses in industrial, automotive, and marine. Not tape. Self-fusing, multi-purpose, silicon w...

Specially-formulated synthetic grease designed to provide long-lasting lubrication for all types of moving and/or sliding parts. This lubricant pr...

Molybdenum-disulfide based solid film lubricant. Heavy-duty, anti-seize is formulated with graphite and molybdenum (moly) to withstand extreme tem...

Heavy duty coating provides long-term protection for metal parts, equipment, and machinery. Forms a protective, waxy film which seals out moisture...

Makes replacement, high performance o-rings in less than a minute. Eliminates the need to disassemble parts and components. Convenient kit includ...

Excellent for Thread fittings. High temperature, universal sealant that lubricates and seals threaded joints on water, oil, and fuel lines. Resis...

Urethane impregnated fiberglass tape, activated by water, for reliable, temporary repairs of metal, plastic, and composite pipes. Stops leaks and ...

Urethane impregnated fiberglass tape, activated by water, for reliable, temporary repairs of metal, plastic, and composite pipes. Stops leaks and ...

Turns a bottle of 50 mL or 250 mL anaerobic adhesive bottle into a dispensing system. Prevents spills, eliminates mess and waste. A single drop o...

This product seals, locks, and retains. It seals against most liquids and gases and works well on coarse threads, large gaps, and all overhead app...

This compact kit contains everything needed to solve the most common mechanical failures. Attributes:Includes = Plastic Case, Wt. = 2.3 lb. (1 K...

No mess, semi-solid formula offers added control and ease of use. Patented package is portable and won’t leak or spill. Seals and holds the heavi...

Can be applied quickly and neatly on a variety of metal surfaces, including aluminum, to form a flexible, solvent resistant seal. Designed for rig...

Convenient semisolid stick is designed for quick, reliable curing on metal, tapered pipe threads and fittings. Controlled lubricity prevents galli...

Bonds non-threaded, cylindrical metal assemblies with gaps up to 0.005” diameter. High temperature retaining compound in a revolutionary semi-soli...

A general purpose instant adhesive featuring an innovative, precision flow control applicator. This new, patented, "squeeze grip" applicator allow...

A low strength, grade EV threadlocker that is ideal for coarse threads. Locks, seals, and retains threads. Attributes:Applications = Multi-Purpos...

Reliable, paste-like gasket sealant/dressing/coating. Sets quickly to a hard set and is recommended for rigid, permanent assemblies. Attributes:C...

Reliable, paste-like gasket sealant/dressing/coating. Sets more slowly to a pliable film best suited for non-rigid, vibrating assemblies. Attribu...

Makes Loctite anaerobic machinery adhesives reach desired bond strength faster than liquid primers. Solvent free – environmentally and user-friend...