Pullers & Sets

Clears a bearing splitter bridge to grip the truck rear axle bearing behind it. Includes Spring Clip J4011S, Detachable Tip J4012T, Dual reach Jaw...

Proto Puller Straight Jaw. 6 Ton. Attributes:Wt. = 4.87 lb. (1 SET = 1 SET)

For bore diameters 3/4" to 2". Attributes:Applications = Gear, Includes = Numbers 4040-1 thru 4040-11, Type = Plate Adaptor, Wt. = 3 lb. (1 SET ...

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore.

Adjustable reversible jaw. 4 1/2 in reach. Attributes:For Model = J4217, Type = Reversible Jaw, Used With = J4217 Pullers, Wt. = 0.38 lb. (1 EA...

Proto Reversible Gear Puller. 3-Way. Attributes:Bolt/Screw Length = 9 in, Depth [Max] = 5 1/2 in, Depth [Nom] = 5 1/2 in, Material = Alloy Steel,...

Proto Rear Axle and Tapped Part Puller. Thread: 5/8-in-13. Attributes:Bolt/Screw Size [Nom] = 5/8 in, Rated Cap. = 6 tons, Spreading Cap. [Max] =...

Proto Spring Clip. For use with J4015, J4016, J4017 and J4018 puller jaws. Attributes:Type = Spring Clip, Used With = 4015; 4016; 4017; 4018, ...

T-Handle Rod. Thread: 5/8-in -12 ACME. Attributes:Type = T-Handle, Wt. = 1.87 lb. (1 EACH = 1 EACH)

Includes components to assemble a wide variety of 3 ton, 6 ton, 10 ton slide hammer and threaded part pullers. Attributes:Includes = 2 Way/3 Way S...

Required for large parts with heavy press-fits. Reaches to over 12" and spread of 11". Makes over 10 different adjustable and straight jaw puller...

This Standard 6 Ton Puller Set makes over 20 of the most often used pullers: Internal, External, Slide Hammer, Rear Axle, Harmonic Balancer, etc. ...

Proto Blind Bearing Adapter. Taper and Collet styles. Attributes:Inside Diam [Max] = 11/16 in, Inside Diam [Min] = 9/16 in, Type = Collet, Wt. = ...

Removes gears and bearings too close to another surface for a puller jaw grip, or where the pulled out part must be protected. Case provides space...

Proto Pilot Bearing/Small Bushing Puller. 6 Ton. Reach: 2-in – Spread: 5/8-in to 2-1/2-in inside. Attributes:Bolt/Screw Size [Nom] = 5/8 in, Dep...

These pullers are primarily for the automotive industry for parts such as pulleys. Treated steel screw; features a hex head that can be rotated w...

Forcing screws are forged from alloy steel. Toggle-type puller incorporates an automatic grip-tightening feature. Attributes:Bolt/Screw Length = ...

Durable steel constructions stands up to the toughest industrial use. Makes quick work of even the most stubborn bearing. Attributes:Applications...

Durable steel construction stands up to the toughest industrial use. Makes quick work of even the most stubborn bearing. Attributes:Applications ...

Forcing screws are forged from alloy steel. Toggle-type puller incorporates an automatic grip-tightening feature. Attributes:Bolt/Screw Length = ...

Forcing screws are coated with an aerospace dry film lubricant to increase screw life, reduce wear and torque required for screw turning. Screw th...

Forcing screws are coated with an aerospace dry film lubricant to increase screw life, reduce wear and torque required for screw turning. Screw th...

Forcing screws are coated with an aerospace dry film lubricant to increase screw life, reduce wear and torque required for screw turning. Screw th...

Replacement Puller Jaw. Dual Reach. Attributes:Type = Jaw, Wt. = 1 1/4 lb. (1 EACH = 1 EACH)

Replacement Puller Jaw. Dual Reach. Attributes:Type = Jaw, Wt. = 0.46 lb. (1 EACH = 1 EACH)

60° Taper. For use with Forcing Screw. Attributes:For Model = Set No. 4214; 4205S, Type = Small Detachable Tip, Used With = Set No. 4214; 4205S, ...

60° Taper. For use with Forcing Screw. Attributes:Type = Tip- Standard, Wt. = 0.03 lb. (1 EACH = 1 EACH)

Proto Cone Puller. 6 Tons. Attributes:Applications = Alternator, Depth [Max] = 6 in, Depth [Min] = 4 in, Depth [Nom] = 4 in; 6 in, No. of Arms =...

Proto Cone Puller. 6 Tons. Attributes:Applications = Alternator, Depth [Max] = 4 in, Depth [Nom] = 4 in, No. of Arms = 3, Rated Cap. = 6 tons, Sp...

Proto Cone Puller. 6 Tons. Attributes:Applications = Alternator, Depth [Max] = 6 in, Depth [Nom] = 6 in, No. of Arms = 3, Rated Cap. = 6 tons, Sp...

Removes bearings and bushings from starters, generators, magnetos and small electric motors. Attributes:No. of Arms = 2, Spreading Cap. [Max] = 1 ...

Uses toggle-type action to grip onto all standard post battery terminals. Attributes:Applications = Battery, Depth [Max] = 1 in, Depth [Nom] = 1 i...

Used to pull gears off a hub. Pullers can get a grip without damaging the case-hardened gear teeth. Attributes:Depth [Max] = 5 in, Depth [Nom] = ...

Used to pull gears off a hub. Pullers can get a grip without damaging the case-hardened gear teeth. Attributes:Applications = Wheel Hub, Bolt/Scr...

Used to pull gears off a hub. Pullers can get a grip without damaging the case-hardened gear teeth. Attributes:Depth [Max] = 4 11/16 in, Depth [N...

Proto Standard Tip. For use with J4012 Forcing Screw. Attributes:Type = Tip, Wt. = 0.06 lb. (1 EACH = 1 EACH)

Adjustable reversible jaw. 4 1/2 in reach. Attributes:Type = Jaw, Wt. = 0.35 lb. (1 EACH = 1 EACH)

Proto Rear Axle Flange Foot. Thread: 5/8-in-13. Attributes:Type = Flange, Wt. = 2.04 lb. (1 EACH = 1 EACH)

Proto Slotted Crossarm. Slot Depth (in): 2-25/32. Attributes:Type = Crossarm, Wt. = 1.21 lb. (1 EACH = 1 EACH)

Threaded Crossarms. 12-in Thread size. Attributes:Type = 2-Way Crossarm, Wt. = 0.96 lb. (1 EACH = 1 EACH)

Proto Gear and Bearing Separator Threaded Rod. Threaded. Attributes:Type = Rod, Wt. = 0.66 lb. (1 EACH = 1 EACH)

Proto Slide Hammer. Hole Diameter (in): 5/8. Attributes:Length [Nom] = 5 5/16 in, Type = Slide Hammer, Wt. = 4.97 lb. (1 EACH = 1 EACH)

Adjustable reversible jaw. 4 1/2 in reach. Attributes:Type = Jaw, Wt. = 1/4 lb. (1 EACH = 1 EACH)

11/32-in Length. 2-in Height. Internal Thread: 5/8-in-12 Acme. External Thread: 7/8-in-14 UNF. Attributes:Type = Yoke, Wt. = 0.44 lb. (1 EACH...

Threaded Crossarms. 12-in Thread size. (1 EACH = 1 EACH)

Proto Gear and Bearing Separator Threaded Rod. Threaded. Attributes:Type = Puller Rod, Wt. = 1.42 lb. (1 EACH = 1 EACH)

Proto Inside Hook Jaw. Internal Thread: 5/8-in -12 ACME. Use with 5/8-in Hole (min.). Attributes:Type = Hook, Wt. = 0.20 lb. (1 EACH = 1 EACH)

Proto Inside Jaw. Available in open stock as well in sets: J4290B, J4289B, J4235A, J4235B, J4250, J4251, J4252, J4255. Attributes:Type = Plate Ad...