Proto

2 extra capacity deep flared main pockets. 2 outer pockets. 6 small utility pockets. 2 extra thick hammer or hatchet loops. 1 25-in/30-in tape ...

Includes: 84 Sockets and Accessories, 18 Wrenches, 9 Hex Keys. 111 pieces. 1/4-in, 3/8-in, 1/2-in drive tools. Designed for fastener sizes 4 mm ...

Blades etched with both decimal size and metric equivalent. Blades etched with both decimal size and metric equivalent. Attributes:Blade Length [...

Fits 4, 6 and 12 point fasteners. Full polish finish provides corrosion resistance and easy to clean surfaces. 12 point box end allows for fine i...

Modified square open end provides the strongest design with better fastener grip. Special alloy steel and heat treat permits thin box walls for st...

Modified square open end provides the strongest design with better fastener grip. Special alloy steel and heat treat permits thin box walls for st...

Modified square open end provides the strongest design with better fastener grip. Special alloy steel and heat treat permits thin box walls for st...

Modified square open end provides the strongest design with better fastener grip. Special alloy steel and heat treat permits thin box walls for st...

Modified square open end provides the strongest design with better fastener grip. Special alloy steel and heat treat permits thin box walls for st...

Modified square open end provides the strongest design with better fastener grip. Special alloy steel and heat treat permits thin box walls for st...

For use in confined areas where a fastener cannot be reached with a straight shank. Attributes:Finish = Chrome, Head Thickness [Nom] = 55/64 in, M...

For use in confined areas where a fastener cannot be reached with a straight shank. Attributes:Finish = Chrome, Head Thickness [Nom] = 5/8 in, Mat...

For use in confined areas where a fastener cannot be reached with a straight shank. Attributes:Finish = Chrome, Head Thickness [Nom] = 51/64 in, M...

High leverage handle. Spud end aligns flange holes. Strong box-end designed to turn stubborn nuts and bolts. For heavy construction and field se...

Proto 12 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. The TorquePlus design i...

Rust-resistant finish. Secure fastener fit. Heat treated. Attributes:Finish = Black Oxide, Handle Type = L-Handle, Includes = Plastic Index, Mea...

Crowfoot wrenches are used in hard-to-reach, restricted access situations where a standard wrench or ratchet cannot reach. Anti-Slip Design open e...

1/4 in drive tools. Designed for fastener sizes 5/64 in - 3/4 in. Includes sockets and accessories, wrenches, striking and struck tools, pliers, ...

1/4 in drive tools. Designed for fastener sizes 5/64 in - 3/4 in. Includes sockets and accessories, wrenches, striking and struck tools, pliers, ...

Unique arc design increases surface contact. Increased torque applied to fastener with fewer rounded edges. Anti-Slip Design (ASD) wrench has a l...

Increased torque applied to fastener with fewer rounded edges. Unique arc design increases surface contact. Anti-Slip Design (ASD) wrench has a l...

Increased torque applied to fastener with fewer rounded edges. Unique arc design increases surface contact. Anti-Slip Design (ASD) wrench has a l...

Anti-Slip Design open end (ASD) has patented locking grooves that help prevent the wrench from slipping off the fastener when turning. Crowfoot wr...

Anti-Slip Design open end (ASD) has patented locking grooves that help prevent the wrench from slipping off the fastener when turning. Crowfoot wr...

Blades etched with both decimal size and metric equivalent. Blades are offset at a right angle to help protect hands from a hot manifold while set...

1/4 in and 3/8 in drive tools. Designed for fastener sizes 1/14 in - 1 in, 4 mm - 19 mm. Includes sockets and accessories, wrenches, striking and...

Increased torque applied to fastener with fewer rounded edges. Unique arc design increases surface contact. Anti-Slip Design (ASD) wrench has a l...

Includes compression gauge, O-ring, compression gauge and instructional pamphlet. Flexible hose and quick-disconnect coupler permit fast, easy eng...

Proto Reversible Adjusting Nut. Thread: 7/8-in -14 UNF. Attributes:Type = Nut, Wt. = 3/4 lb. (1 EACH = 1 EACH)

Proto Slide Hammer. Hole Diameter (in): 5/8. Attributes:Length [Nom] = 4 in, Type = Slide Hammer, Wt. = 2.80 lb. (1 EACH = 1 EACH)

Proto Cap Screw Jaw. Can be used with 1/2-in cap screws. Attributes:Type = Jaw, Wt. = 0.88 lb. (1 EACH = 1 EACH)

11/32-in Length. 2-in Height. Internal Thread: 5/8-in-12 Acme. External Thread: 7/8-in-14 UNF. Attributes:Type = Yoke, Wt. = 0.39 lb. (1 EACH...

Full polish finish resists chipping and rust. Box end is countersunk for easy application to the fastener. Spline design was created for use with...

Contains twenty-five short blades in holder. Short blades etched with both decimal size and metric equivalent. Includes all blade sizes in betwee...

Blades etched with both decimal size and metric equivalent. Easily measures gap widths. Durable, flexible steel construction. Attributes:Blade L...

Long Feeler Gauge Blades, 0.004 in. Long blade feeler gauge. 0.0015-inch Blade thickness. 0.01-lbs Weight. Attributes:Measuring System = Inch/M...

Includes: 1 Wrench, 1 Striking and Struck Tool, 6 Pliers, 6 Screwdrivers, 11 Miscellaneous Tools. 25 pieces. Enhanced version of Stanley Proto 90...

Includes: 176 Sockets and Accessories, 57 Wrenches, 3 Striking and Struck Tools, 5 Pliers, 30 Screwdrivers. 271 pieces. 1/4-in, 3/8-in drive tool...

Full Polish Finish. Packaged in plastic blow-molded case for easy storage. Attributes:Includes = (4) Square Bits; (5) Socket Heads; (5) Slotted...

Ball lock. Magnetic. Attributes:Drive Size [Nom] = 1/4 in, Drive Type = Hex, Finish = Gold Tone, Material = Forged Alloy Steel, Measuring System ...

Proto Inside Hook Jaw. Internal Thread: 5/8-in -12 ACME. Use with 5/8-in Hole (min.). Attributes:Type = Hook, Wt. = 0.20 lb. (1 EACH = 1 EACH)

Proto Inside Jaw. Available in open stock as well in sets: J4290B, J4289B, J4235A, J4235B, J4250, J4251, J4252, J4255. Attributes:Type = Plate Ad...

11/32-in Length. 2-in Height. Internal Thread: 5/8-in-12 Acme. External Thread: 7/8-in-14 UNF. Attributes:Type = Yoke, Wt. = 0.44 lb. (1 EACH...

Full polish finish on handle provides corrosion resistance and easy to clean surfaces. Shorter length for access to confined workspaces. 12 point...

Proto Retaining Pin. For use with impact sockets. Attributes:Drive Size [Nom] = 3/4 in, Type = Pin, Used With = All 3/4 in. Drive Impact Sockets ...

Tight tolerances for snug fit on fastener. Ball and spring design which allows for a 30° working angle. Designed to withstand the high torque and...

For impact sockets and attachments. Attributes:Type = O-Ring, Used With = All 3/4 in. Drive Sockets, Wt. = 0.01 lb. (1 EACH = 1 EACH)

Proto torque multipliers provide overload protection with replaceable output square drives that are designed to twist off at 3%–10% over maximum ou...